LCS 150

The LCS 150 is a versatile laser cutting system conceived for micro-machining applications, such as cutting, drilling or grooving for a variety of industrial sectors. Different laser sources are available for this machine, allowing up to 200 W.

Ordering Equipment

Product Advantages/Features

  • Sharp and Smooth

  • Cylindrical beam resulting in parallel kerfs (no V-shape)

  • Smooth cutting surfaces and sharp edges (Ra as low as 0.15 μm)

  • Virtually no heat impact thanks to water jet cooling capability


  • Fast and Accurate

  • Finnish cutting of 1.6 mm PCD and cemented carbide in up to 5 mm/min. No limit in thickness. 

  • High mechanical precision with a tolerance of less than +/- 3 μm

  • Very small kerf width (down to 30 μm)


  • Clean and Easy

  • Clean surfaces and no depositions

  • No or very little post treatment required

  • No focus control necessary due to long working distance

Technical Parameter

Version 

LCS 150

Working volume mm (W x D x H)

 150 x 150 x 100

Accuracy (after compensation) µm

+/- 5

Repeatablility  µm

+/- 3

Number of axes 

2-axis/3-axis/4-axis

Laser Type

Diode pumped solid state Nd: YAG, pulsed

Wavelength nm

532/1064

Dimensions machine mm (W x D x H)

1050 x 800 x 1870

Dimensions cabinet  mm (W x D x H)

700 x 2300 x 1600

Materials

Hard materials: Polycrystalline CBN (PcBN), polycrystalline diamonds (PCD), monocrystalline diamonds (MCD), chemical-vapor-deposition (CVD) diamonds, natural diamond (ND), tungsten carbide (WC)

Metals: Stainless steel, Durnico, CuBe, copper, brass, aluminum, shape-memory alloys (Nitinol), titanium, nickel, super alloys etc. 

Ceramic: Zirconia (ZrO2), LTCC (low-temperature co-fired ceramic), Aluminum-nitride (AlN), Aluminum-oxide (Al2O3) 

Application Cases

Recommended Equipment

LCS 50

LCS 50

Materials：

Hard materials、Metals、Ceramic

3-axis machine：

2D cutting, drilling, slicing, grooving

5-axis machine：

3D shaping, cutting, drilling, slicing, edge grinding (K-land edges, single or multiple clearance angles), grooving, milling, engraving, profiling

LCS 150

LCS 150

Materials：

Hard materials，Metals，Ceramic

3-axis machine：

2D cutting, drilling, slicing, grooving, engraving

LCS 305

LCS 305

Materials：

Hard materials，Metals，Ceramics

Operations：

3D cutting, shaping, drilling, slotting, grooving, trenching, milling, slicing, edge grinding (K-land edges, single or multiple clearance angles) engraving, profiling
DCS 50

DCS 50

Materials:

Rough diamonds , Laboratory grown diamonds (CVD, HPHT)

3-axis machine:

Sawing, slicing

5-axis machine:

Sawing, pie sawing, slicing, drilling, fancy and round bruting, coning, blocking/ faceting
DCS 150

DCS 150

Materials:

Rough diamonds , Laboratory grown diamonds (CVD, HPHT)

3-axis machine:

Sawing, coring, slicing
Return to List

Contact us

If you have any question，please contact us at any time.

Contcat Us
0